Description

Rogers PCB

Product Name: Rogers SubstratePCB
Material: rogers PCB material

Quality standard: lPCB6012 Class2 or Class3
Rogers PCB material dielectric constant: 2.2-16
The texture of material: rogers ceramic PCB
Layers: 1layer -multilayer hybrid PCB
Thickness:0.1mm-12mm

Copper thickness: 0.50z-30z

Surface technology: Silver, Gold, OSP
Application: High frequency rogers microwave PCB

RogersPcB fabrication needsim-depth research on high-frequency pcB.

ZBPCB is a Rogers PCB manufacturer, and has a deep understanding of the performance of Rogers PCB materials,
such as Rogers PCB laminates and Rogers PCB dielectric constant and other Rogers PCB material properties.

Rogers substrate PcB is a high-performance PcB material model produced by Rogers. Unlike traditional FR-4PcB materials, there is no epoxy resin in Rogers PCB materials,
And Rogers ceramic PcB is used as a high-performance PcB material. Rogers PCB has super dielectric constant and temperature stability.
The thermal expansion coefficient of Rogers PB dielectric constant is very consistent with the thermal expansion coefficient of copper foil,
Which can be used to improve the shortcomings of PTF substrate; it is very suitable for high-speed PCB and high-speed PCB design,
As well as commercial microwave antenna and RF product applications. Because Roers PCB has extremely low water absorption,
It can be used as an ideal material for high-humidity environment applications, providing the highest quality Roers PCB materials and related resources to customers in the high-frequency PCB industry,
And fundamentally managing high-quality PCB quality.

Rogers PCB is widelv used in microwave communication, 5a, military radar, and other high-freguency PCB and high-reliability felds

Characteristics of Rogers substrate PCB

1. Good rigidity, mechanical and electrical properties, and easy hole metallization

2. Rogers PCB plate thickness has high accuracy.

3. Rogers substrate PCB has good copper sheet adhesion, high heat disipation capacity, good peel strength, no delamination, and blistering,
4. The processing cost of Rogers PCB is compatible with FR-4 processing technology, but the plate cost is high.
5.Rogers substeate PCB is the most stable materialin the industny.

It has the characteristics of low dielectric constant and low water absorption, and the dielectric constant Dk changes stably with frequency. It has a low loss rate in aerospace applications and is widely used in high reliability, aerospace, defense applications or harsh environment applications.

Rogers substrate PCB series3000 Series

(PTFE+Ceramic /PTFE+Ceramic glass fber, DK=3.0-10.2: RO3003, RO3003G2, RO3035,RO3006, RO3010, RO3203. RO3206, RO3210

4000 Series (Hydrocarbon+PTFE,DK=3.38-6.15): RO4350B,RO4003CRO4835. RO4360G2

(Hvdrocarbon+PTFE+Ceramic glass fber, DK=3 3-3,5):RO4533,RO4534 RO4535,RO4725XR,RO4730IXR.RO4730G

35000 Series (Glass fiber+PTFE,DK=1.96-233): RT/duroid 5880,RTduroid 5880L2. RTduroid 5870

6000 Series, lt is designed for electronic circuits and microwave circuits requiring a high dielectric constant

(PTFE+Ceramic, DK=2.94-10.2): RT/duroid 6002, RT/duroid 6006, RT/duroid 6035HTC,RTduroid 6010LM

(PTFE+Ceramic alass fber, DK=2.9-10.2): RT/duroid 6202. RTiduroid 6202PR

TMM Series (Hvdrocarbon+Ceramic, DK=3.27-12.85): TMM3.TMM4,TMM10,TMM10i. TMM13i

Other: Kappa 438

Prepreg: RO4450B, RO4450F

Bonding fIm: 2929,3001,ULTRALAM3908, RO3003,RO3006,RO3010, RT/duroid6002

Differences between Rogers substrate PCB prototype and FR4 PCB prototype

Rogers substrate PCB pnce and fr4CB price is the first difference to consider. The ultimate goal of any PCB manufacturer is to launch a PCB prototype with the best cost efficiency.
FR4PCb prototype is the most durable Peb or Rotowpe on the market, if your gesmn is for extreme environments and extreme temperature settings,
You must use FR4 PCB prototype. If your application requires high-speed PCB or extreme temperatures, you may have to ignore Rogers PCB price and choose the expensive Roers PCB
Prototype. Impedance stability is another difference between FR4PB prototype and Rogers PB prototype.
The dielectric constant of Rogers substrate PCB is one of the important factors that determine the impedance and stability of the PCB, it is lower than the dielectric constant of Rogers ecR capacitors,
While the impedance is stable in FRdiste Cheanest PcR prtatneavaleahe, with a dielectric value of up to 45. Roger PcB has a higher dielectric constant with a wider range, for example,
Rogers PCB dielectric constant ranges from 2 to 0.16.
The dielectric constant properties of Rogers PCB make Rogers PCB the choice of Rogers PCB laminate for high heat applications where stable impedance is critical.

Thermal management is also the difference between Rogers PCB boards and F4 PCB prototypes. In high-speed PCB applications,
PCB prototypes generate a lot of heat and must be carefully handled with a good thermal management system.
In such cases, thermostat-based laminates in Rogers PCE are the best choice. FR4PB cannot withstand high temperatures and therefore cannot be used in such applications.

Dissipation factor represents the signal in PCE. Rogers PCE has much lower signal loss compared to FR4Pc.
The dissipation factor of FR4PCB is 0.0296 while the dissipation factor of Rogers PCB is 0.00496. Therefore, Rogers PcB can provide reliable results with minimal electrical signal loss compared to FR4 PcB.

He believes that Rogers Peb prtoheancFe4Pes ortotpeis reciy recittic: and thema popetiesot substete matenas hsintuo wilaltethe peramance of the PCB pattern.
Rogers PCB has the least moisture absorption, so it provides the best efficiency in various environmental conditions

The application and performance of Rogers PCB is based on overall performance. FR4PCB is considered the cheapest PCB, while Rogers substrate PCB has better performance.
Therefore, FR4PCB is best suited for medium and low frequency applications.
They are rugged, have an excellent balance in electrical stability, and can easily manufacture PCBs in almost all processes.
In the PCB industry, Roger substrate PCBs are suitable for applications with advanced performance requirements.

Rogers PCB impedance calculator, Rogers PCB impedance calculation tool

Theoretically, the impedance control of differential bus (USB Ethernet) or DDR bus is the impedance control of single chip or dual chip. Satellite system or radar system needs to control impedance. The specific range is related to the impedance matching of chip pin 10, which can be determined by the characteristics of PCB. For example, differential signal needs impedance control, which is adjusted by PCB trace width, PCB stack thickness and trace spacing. Generally, the impedance of differential signal is controlled within the range of 85-120 ohms for reference. Please pay attention to the specifications of other buses on PCB.

Download Rogers substrate PCB impedance calculator

Use of Rogers PCB calculator software

There are more than ten microwave impedance line models to choose from in the design type menu of Rogers PCB impedance calculation software mwi-2018, which are divided into three categories: coplanar waveguide, microstrip line, and stripline. They are also divided into the same medium model and different medium model. Designers can choose according to their actual needs.

1. After selecting the model, start to select the high-frequency PCB board to be used 2. Rogers’ high-frequency PcB materials can be found in the Roers Pc calculator. If you don’t know much about the characteristics of the circuit board, please contact the zbpcb engineer and we will recommend the right PCB material for you according to your specific project and product requirements. For example, if you choose R04350B as the required PcB material. Rogers substrate PCB DK, Rogers PCB Df. and Rogers PcB thermal conductivity and other material properties of Ro4350B will be automatically filled in 3. After selecting the material thickness, you also need to select the copper thickness. Copper roughness RMS and copper conductivity will be automatically brought in without additional operation. After the above operations, the relevant actions of the PCB material have been completed.

What is Rogers PCB?

Rooers is an American material company, and the volume of Rooers’ Pc dielectric constant is stable and consistent with the electrical and thermal properties of the substrate material. The Rogers PcB laminates produced by Rooers are mainly used for high-frequency microwave PCB manufacturing. PCB prototype boards that need to be manufactured using Rogers PcB materials are collectively referred to as Rogers PCBs by ZBPCB

What Rogers board PCBs can ZBPCB manufacture, and what is the price of Rogers substrate PCBs?

PCB can manufacture a full range of Rogers PCBs, and often manufactures Rogers PCBs of ro4350b, r4003c r04835, t5880, 6035htc ro303 and r4725. With a large number of Rogers PCB

substrate stocks of ro4350b, ro4003c, ro4835, rt5880, ro3003 and ro4725.

ZBPCB has mature experience in PCB prototype manufacturing and PCB prototype quality management, which can improve the yield of PCB production and reduce costs, and can provide customers with products at the lowest Rogers PCB price.

If you need technical consultation of Rogers substrate PCB or Rogers PCB quotation, please contact us.

Previous: Cavity PCB                                                                                                                                                                                                                                                                    Next: High frequency PCB